Examples of determining electronic component authenticity via electronic signal signature measurement are discussed. Reference pin identifiers corresponding to pins of a known authentic electronic component are determined. Measurement values corresponding to characteristics of pins of an electronic component are obtained, and pin identifiers based on the measurement values are generated. Accordingly, an indication that the electronic component is authentic can be provided based at least in part on a comparison of the pin identifiers and the reference pin identifiers.Computer Science Cybersecurity
A system and method for continuous glucose monitoring (CGM) of blood in a blood vessel of a patient using a non-invasive sensor composed of a patch antenna operating in the Industrial, Scientific and Medical (ISM) Radio band (5.725 GHz-5.875 GHz). The device determines the blood glucose concentration of the blood in the blood vessel based on the measured shift of the resonant frequency of the non-invasive antenna patch sensor. A radio frequency (RF) synthesizer is used to drive the patch antenna with a fraction of its output coupled to both the antenna and receiver through a directional coupler. In this approach both the transmitted (FWD) and received (REV) power are processed, by demodulating logarithmic amplifiers, which convert the RF signals to corresponding voltages for downstream processing. The resulting voltages are then fed into a microcontroller and the measured shift in resonant frequency is converted to a real-time glucose concentration. USF has developed a novel glucose monitoring system with the antenna on the external surface of the body. The glucose concentration in the blood is determined by the sensor on the blood vessel with shift in the resonant frequency. These variations of resonant frequency are displayed in glucose levels. With the implementation of this system architecture, an accurate, real time assessment of glucose levels in the blood can be made using a single antenna patch. This system eliminates the need for electronics hence also batteries.