-
"Conductive Polymer Nanocomposites?Based Electrode Materials for Supercapacitors: Synthesis, Characterization, and Electrochemical Performance"
2024 ▪
Okenwa I. Okoli;
Md Mostafizur Rahman;
Iftidul Alam;
Mohammad Mizanur Rahman Khan;
Md. Ismot H. Al Mobin;
Md. Zahangir Alam;
Ahasun H. Hridoy;
M. Mahmud Alam;
Mohammed M. Rahman;
-
"Advances in Embedded Sensor Technologies for Impact Monitoring in Composite Structures"
2024 ▪
Journal of Composites Science
-
"Enhanced piezo-response of mixed-cation copper perovskites with Cl/Br halide engineering"
2024 ▪
Materials Advances
-
"Synthesis of different organic ammonium-based bismuth iodide perovskites for photodetection application"
2024 ▪
RSC Advances
-
"Processing of V2AlC MAX phase: Optimization of sintering temperature and composition"
2023 ▪
Ceramics International
-
"DEVELOPMENT OF A FIBER-SHAPED MLPEROVSKITE SENSOR FOR STRUCTURAL HEALTH MONITORING IN COMPOSITES"
2023 ▪
-
"Synthesis of polyaniline-graphene oxide based ternary nanocomposite for supercapacitor application"
2023 ▪
Journal of Energy Storage
Okenwa I. Okoli;
Md Mostafizur Rahman;
Minhazur Rahman Shawon;
Md Habibur Rahman;
Iftidul Alam;
Muhammad Omar Faruk;
Mohammad Mizanur Rahman Khan;
-
"An efficient way of harvesting mechanoluminescent light: Flexible pressure sensor application"
2023 ▪
Journal of Luminescence
Okenwa I. Okoli;
Md Abu S Shohag;
Geoffrey Ryan Adams;
Lucas Braga Carani;
Vincent O. Eze;
Tony Ichite;
-
"Vanadium MXenes materials for next-generation energy storage devices"
2023 ▪
Nanotechnology
-
"Easy fabrication of l-glutamic acid/ZnS composites for efficient photo-catalytic and supercapacitor performance"
2023 ▪
RSC Advances
Okenwa I. Okoli;
Md Mostafizur Rahman;
Mohammad Mizanur Rahman Khan;
Mohammad Riaz Hosen Shohag;
Md. Abu Saleh;
Azmeri Sultana Supta;
Mohammad Shahadat Hussain Chowdhury;
Hadi M. Marwani;
Mohammed M. Rahman;
-
"Effect of Interface Modification on Mechanoluminescence-Inorganic Perovskite Impact Sensors"
2022 ▪
Sensors
-
"Ti-based MXenes for Energy Storage Applications: Structure, Properties, Processing Parameters and Stability"
2022 ▪
ECS Journal of Solid State Science and Technology
-
"Impact sensing and localization in composites structures with embedded mechanoluminescence-perovskite sensors"
2022 ▪
Sensors and Actuators A Physical
Okenwa I. Okoli;
Vincent Obiozo Eze;
Lucas Braga Carani;
Terrencia Deniqua Martin;
-
"Interface Engineering of Embedded Mechanoluminescence-Perovskite Self-powered Pressure Sensor for Improved Performance"
2022 ▪
Lecture notes in civil engineering
-
"A Review on the Out-of-Autoclave Process for Composite Manufacturing"
2022 ▪
Journal of Composites Science
-
"Inorganic cesium lead mixed halide based perovskite solar materials modified with functional silver iodide"
2022 ▪
Scientific Reports
Okenwa I. Okoli;
Vincent Obiozo Eze;
Lucas Braga Carani;
M. Jasim Uddin;
Haimanti Majumder;
-
"Embedded Perovskite-Mechanoluminescent Sensor for Applications in Composite Materials"
2021 ▪
Lecture notes in civil engineering
Okenwa I. Okoli;
Vincent Obiozo Eze;
Md Abu S Shohag;
Geoffrey Ryan Adams;
Lucas Braga Carani;
-
"Enhanced Photoresponse of Inorganic Cesium Lead Halide Perovskite for Ultrasensitive Photodetector"
2021 ▪
Lecture notes in civil engineering
Okenwa I. Okoli;
Vincent Obiozo Eze;
Md Abu S Shohag;
Geoffrey Ryan Adams;
Bryana Beckford;
-
"Performance Analysis of Embedded Mechanoluminescence-Perovskite Self-Powered Pressure Sensor for Structural Health Monitoring"
2020 ▪
Journal of Composites Science
-
"Expanding and Improving the Integration of Multidisciplinary Projects in a Capstone Senior Design Course: Experience Gained and Future Plans"
2020 ▪
-
"NSF-Retaining Engineers through Research Entrepreneurship and Advanced–Materials Training (RETREAT)"
2020 ▪
-
"An Overview of Our Experience Integrating Multidisciplinary and International Design Projects within the Senior Capstone Design Course"
2020 ▪
-
"Enhanced Inorganic CsPbIBr2 Perovskite Film for a Sensitive and Rapid Response Self-Powered Photodetector"
2020 ▪
The Journal of Physical Chemistry C
Okenwa I. Okoli;
Vincent Obiozo Eze;
Geoffrey Ryan Adams;
Lucas Braga Carani;
Ryan James Simpson;
-
"Fully Integrated Mechanoluminescent Devices with Nanometer-Thick Perovskite Film as Self-Powered Flexible Sensor for Dynamic Pressure Sensing"
2020 ▪
ACS Applied Nano Materials
-
"Fabrication of rapid response self-powered photodetector using solution-processed triple cation lead-halide perovskite"
2020 ▪
Engineering Research Express
Okenwa I. Okoli;
Vincent Obiozo Eze;
Md Abu S Shohag;
Geoffrey Ryan Adams;
Ryan James Simpson;
Helen Parker;
-
"Evaluation of the inter-particle interference of cellulose and lignin in lignocellulosic materials"
2020 ▪
International Journal of Biological Macromolecules
-
"Synergistic effect of the anti-solvent bath method and improved annealing conditions for high-quality triple cation perovskite thin films"
2020 ▪
RSC Advances
Okenwa I. Okoli;
Geoffrey Ryan Adams;
Lucas Braga Carani;
Vincent O. Eze;
Aaron Pino;
Claire Jolowsky;
-
"Mechanoluminescent-Perovskite Pressure Sensor for Structural Health Monitoring"
2019 ▪
Okenwa I. Okoli;
Md Abu S Shohag;
Geoffrey Ryan Adams;
Lucas Braga Carani;
Vincent O. Eze;
Tony Ichite;
-
"The fabrication of mechanoluminescent composites manufactured via the displaced foam dispersion technique"
2019 ▪
Plastics Rubber and Composites Macromolecular Engineering
-
"Conductive glass free carbon nanotube micro yarn based perovskite solar cells"
2019 ▪
Applied Surface Science
Okenwa I. Okoli;
M. Jasim Uddin;
Istiak Hussain;
Aminur Rashid Chowdhury;
Jared Jaksik;
Glenn Grissom;
Ahmed Touhami;
Elamin E. Ibrahim;
Mark Schauer;
-
"Towards optimization of the osmotic drying process of alumina-gelatin objects: Regression analysis and verification"
2018 ▪
Ceramics International
-
"Nonparasitic behavior of embedded triboluminescent sensor in multifunctional composites"
2018 ▪
Composites Part A Applied Science and Manufacturing
-
"Real-time damage monitoring in trailing edge bondlines of wind turbine blades with triboluminescent sensors"
2018 ▪
Structural Health Monitoring
-
"Three-dimensional carbon nanotube yarn based solid state solar cells with multiple sensitizers exhibit high energy conversion efficiency"
2018 ▪
Solar Energy
Okenwa I. Okoli;
M. Jasim Uddin;
Jared Jaksik;
Glenn Grissom;
Ahmed Touhami;
H. Justin Moore;
Monica McEntee;
Erin M. Durke;
Sayeeda T.J. Aishee;
Margaret Cua;
-
"Flexible Wire?Shaped Perovskite Photodetector via Joule Heating for Improved Crystallization and Performance"
2018 ▪
Advanced Materials Interfaces
-
"Designing and implementation of triboluminescent materials for real-time load monitoring"
2018 ▪
Materials & Design
Okenwa I. Okoli;
Md Abu S Shohag;
Scott A. Tran;
Taniwa Ndebele;
Nirmal Adhikari;
-
"A review of perovskite solar cells with a focus on wire-shaped devices"
2018 ▪
Renewable energy focus
-
"Enhanced fabrication process for in situ triboluminescent optical fiber sensor for multifunctional composites"
2018 ▪
Measurement
-
"Advances of Bio-inspired In-situ Triboluminescent Optical Fiber Sensor for Damage and Load Monitoring in Multifunctional Composite"
2017 ▪
-
"Ultraviolet priming of triboluminescence"
2017 ▪
Journal of Luminescence
-
"Influence of osmotic drying with an aqueous poly(ethylene glycol) liquid desiccant on alumina objects gelcast with gelatin"
2017 ▪
Ceramics International
Okenwa I. Okoli;
E.C. Hammel;
Margaret Scheiner;
Chelsea EE Armbrister;
J.A. Campa;
-
"Development of friction-induced triboluminescent sensor for load monitoring"
2017 ▪
Journal of Intelligent Material Systems and Structures
-
"Mechanical Characterization of EuD4TEA? and ZnS:Mn?Enhanced Composites"
2017 ▪
Crystal Research and Technology
-
"Damage mitigation techniques in wind turbine blades: A review"
2017 ▪
Wind Engineering
-
"Laser-induced graphitic healing of carbon nanotubes aligned in a sheet"
2017 ▪
Journal of Laser Applications
-
"Nanostructured functional materials for advanced three-dimensional (3D) solar cells"
2017 ▪
Solar Energy Materials and Solar Cells
-
"Pressurless Infiltration of Al 2 O 3 Preform Containing Aligned Two?Dimensional Channels with Al?Mg?Si Alloy"
2017 ▪
Ceramic engineering and science proceedings
-
"A study on the fabrication of plasticized polystyrene-carbon nanotube nanocomposites for foaming"
2016 ▪
Journal of Cellular Plastics
-
"Synthesis and characterization of polystyrene carbon nanotube nanocomposite for utilization in the displaced foam dispersion methodology"
2016 ▪
Composites Part B Engineering
-
"Measurement of impact force for triboluminescent-enhanced composites by modified impulse method"
2016 ▪
Journal of Reinforced Plastics and Composites
-
"Progress towards self-healing polymers for composite structural applications"
2015 ▪
Polymer
-
"Synthesis conditions of europium tetrakis dibenzoylmethide triethylammonium crystals"
2015 ▪
Crystal Research and Technology
-
"Buckypaper-Cored Novel Photovoltaic Sensors for In-Situ Structural Health Monitoring of Composite Materials Using Hybrid Quantum Dots"
2015 ▪
Conference proceedings of the Society for Experimental Mechanics
-
"In Pursuit of Bio-inspired Triboluminescent Multifunctional Composites"
2015 ▪
Conference proceedings of the Society for Experimental Mechanics
-
"Fabrication of silicon nanowire on freestanding multiwalled carbon nanotubes by chemical vapor deposition"
2015 ▪
Materials Letters
-
"Micromechanics predictions for two-phased nanocomposites and three-phased multiscale composites: A review"
2015 ▪
Journal of Reinforced Plastics and Composites
-
"Characterization of triboluminescent enhanced discontinuous glass–fiber composite beams for micro-damage detection and fracture assessment"
2015 ▪
Journal of Luminescence
-
"Screening Failure Detection of Structural Composite Systems: Embedded Triboluminescent Structronic Wires"
2015 ▪
-
"A high efficiency 3D photovoltaic microwire with carbon nanotubes (CNT)-quantum dot (QD) hybrid interface"
2014 ▪
physica status solidi (RRL) - Rapid Research Letters
-
"Processing and properties of advanced porous ceramics: An application based review"
2014 ▪
Ceramics International
-
"3D Wire?Shaped Dye?Sensitized Solar Cells in Solid State Using Carbon Nanotube Yarns with Hybrid Photovoltaic Structure"
2014 ▪
Advanced Materials Interfaces
-
"MANUFACTURE OF SIZEABLE MULTISCALE COMPOSITES THROUGH ENHANCEMENT OF RESIN FLOW IN THE RIDFT PROCESS"
2014 ▪
Journal of Advanced Manufacturing Technology (JAMT)
-
"Getting light through cementitious composites with in situ triboluminescent damage sensor"
2013 ▪
Structural Health Monitoring
-
"Tailoring the efficiency of 3D wire-shaped photovoltaic cells (WPVCs) by functionalization of solid-liquid interfacial properties (Phys. Status Solidi A 12?2013)"
2013 ▪
physica status solidi (a)
-
"Real time failure detection in unreinforced cementitious composites with triboluminescent sensor"
2013 ▪
Journal of Luminescence
-
"Tailoring the efficiency of 3D wire-shaped photovoltaic cells (WPVCs) by functionalization of solid-liquid interfacial properties"
2013 ▪
physica status solidi (a)
-
"Predicting mechanical properties of multiscale composites"
2013 ▪
Plastics Rubber and Composites Macromolecular Engineering
-
"Carbon nanotubes (CNTs) enrich the solar cells"
2013 ▪
Solar Energy
-
"Effect of 2-D regular channels and their configurations on properties of ceramic preforms"
2013 ▪
Ceramics International
-
"Self-aligned carbon nanotubes yarns (CNY) with efficient optoelectronic interface for microyarn shaped 3D photovoltaic cells"
2013 ▪
Solar Energy Materials and Solar Cells
-
"Manufacturing process improvement and mechanical modelling of multiwalled carbon nanotube/epoxy composites"
2013 ▪
Plastics Rubber and Composites Macromolecular Engineering
-
"Tailoring the photocatalytic reaction rate of a nanostructured TiO2 matrix using additional gas phase oxygen"
2013 ▪
International nano letters.
Tarik Dickens;
Okenwa I. Okoli;
M. Jasim Uddin;
Md Mohibul Alam;
Md Akhtarul Islam;
Sharmin Rahman Snigda;
Sreejon Das;
Mohammed Mastabur Rahman;
Md Nizam Uddin;
Cindy A Morris;
Richard D Gonzalez;
Ulrike Diebold;
-
"3D Photovoltaic Sensors for In-Situ Structural Health Monitoring of Advanced Composites"
2013 ▪
Structural Health Monitoring
-
"Triboluminescent Optical Nerves for Smart Concrete Structures"
2013 ▪
Structural Health Monitoring
-
"A review of multiscale composite manufacturing and challenges"
2012 ▪
Journal of Reinforced Plastics and Composites
-
"Solid state dye-sensitized photovoltaic micro-wires (DSPMs) with carbon nanotubes yarns as counter electrode: Synthesis and characterization"
2012 ▪
Solar Energy Materials and Solar Cells
-
"Solid-State Dye Sensitized Optoelectronic Carbon Nanotube-Wires: An Energy Harvesting Damage Sensor With Nanotechnology Approach"
2012 ▪
Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Structural Health Monitoring
-
"Optimising lamp positions in UV curing of composite components manufactured using RIDFT process"
2012 ▪
Plastics Rubber and Composites Macromolecular Engineering
-
"Ceramic Preforms with 2D Regular Channels for Fabrication of Metal/Ceramic?Reinforced Composites"
2012 ▪
International Journal of Applied Ceramic Technology
-
"Effects of ZnS:Mn concentrated vinyl ester matrices under flexural loading on the triboluminescent yield"
2012 ▪
Journal of Luminescence
-
"Characterisation and modelling of CNT–epoxy and CNT–fibre–epoxy composites"
2011 ▪
Plastics Rubber and Composites Macromolecular Engineering
-
"Enabling damage detection: manufacturing composite laminates doped with dispersed triboluminescent materials"
2011 ▪
Journal of Reinforced Plastics and Composites
-
"Ceramic Preforms with 2D Regular Channels for Fabrication of Metal/Ceramic-Reinforced Composites"
2011 ▪
International Journal of Applied Ceramic Technology
-
"Development of a triboluminescence-based sensor system for concrete structures"
2011 ▪
Structural Health Monitoring
-
"AC 2011-1665: AN OVERVIEW OF OUR EXPERIENCE INTEGRATING MULTIDISCIPLINARYANDINTERNATIONALDESIGNPROJECTSWITHIN THE SENIOR CAPSTONE DESIGN COURSE"
2011 ▪
2011 ASEE Annual Conference & Exposition
-
"Mimicking the human nervous system with a triboluminescence sensory receptor for the structural health monitoring of composite structures"
2011 ▪
Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
-
"Progress in triboluminescence-based smart optical sensor system"
2011 ▪
Journal of Luminescence
-
"Characterization of the Triboluminescence Performance of ZnS:Mn Under Repeated Mechanical Loading for Smart Optical Damage Sensor System"
2010 ▪
Structural Materials Technology
-
"Densification Enhancement of Alumina by Sandwich Process Design"
2009 ▪
Ceramic engineering and science proceedings
-
"Determination of effects of production parameters on the viability of polycarbonate films for achieving in-mold decoration in resin infused composite components"
2009 ▪
Composites Part A Applied Science and Manufacturing
-
"Experimental Evaluation of Co-Infusion as a Viable Method for In-Mold Coating of Composite Components"
2008 ▪
Journal of Reinforced Plastics and Composites
-
"Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites"
2008 ▪
Composites Science and Technology
-
"Fracture Toughness Enhancement for Alumina Systems: A Review"
2008 ▪
International Journal of Applied Ceramic Technology
-
"In-mold Coating of Composites Manufactured by the Resin Infusion between Double Flexible Tooling Process by Means of Co-infusion"
2006 ▪
Journal of Reinforced Plastics and Composites
-
"Preliminary assessment of the ultra violet curing of composites manufactured by the resin infusion between double flexible tooling process"
2006 ▪
Polymer Composites
-
"In-mold Coating of Composites Manufactured by Resin Infusion between Double Flexible Tooling Process"
2005 ▪
Journal of Reinforced Plastics and Composites
-
"Development of the Resin Infusion between Double Flexible Tooling process : assessment of the viability of in-mold coating and implementation of UV curing."
2004 ▪
-
"Resin Infusion Between Double Flexible Tooling: Evaluation of Process Parameters"
2004 ▪
Journal of Reinforced Plastics and Composites
-
"Resin infusion between double flexible tooling: prototype development"
2003 ▪
Composites Part A Applied Science and Manufacturing
-
"Development of the Double RIFT Diaphragm Forming Process"
2002 ▪
Journal of Reinforced Plastics and Composites
-
"An Attempt at Predicting Failure in a Random Glass/Epoxy Composite Laminate"
2002 ▪
Journal of Reinforced Plastics and Composites
-
"Failure in composite laminates: overview of an attempt at prediction"
2002 ▪
Composites Part A Applied Science and Manufacturing
-
"The effects of strain rate and failure modes on the failure energy of fibre reinforced composites"
2001 ▪
Composite Structures
-
"An Approach for Obtaining the Young's Modulus in Woven Glass/Epoxy Reinforced Composites"
2001 ▪
Journal of Reinforced Plastics and Composites
-
"Aspects of the Tensile Response of Random Continuous Glass/Epoxy Composites"
2001 ▪
Elsevier eBooks
-
"Development of a Semi-Empinical Method for Obtaining the Dynamic Young's Modulus in Random Continuous Reinforced Glass/Epoxy Composites"
2000 ▪
Journal of Reinforced Plastics and Composites
-
"Development of a Semi-Empirical Method for Obtaining the Dynamic Young's Modulus in Random Continuous Reinforced Glass/Epoxy Composites"
2000 ▪
Journal of Reinforced Plastics and Composites
-
"The effect of strain rate and fibre content on the Poisson’s ratio of glass/epoxy composites"
2000 ▪
Composite Structures
-
"Aspects of the Tensile Response of Random Continuous Glass/Epoxy Composites"
1999 ▪
Journal of Reinforced Plastics and Composites
-
"Untitled"
1998 ▪
Journal of Materials Science