-
"Improvement of Electrical and Thermal Properties of Carbon Nanotube Sheets by Adding Silver Nanowire and Mxene for an Electromagnetic-Interference-Shielding Property Study"
2024 ▪
Nanomaterials
-
"Multifunctional properties of carbon nanotube yarn/aerogel laminate composites"
2024 ▪
Composites Part B Engineering
-
"Characterization of multidirectional carbon-nanotube-yarn/bismaleimide laminates under tensile loading"
2024 ▪
Composites Part B Engineering
Zhiyong Liang;
Claire Jolowsky;
Cecil E. Evers;
Britannia Vondrasek;
Michael W. Czabaj;
Gregory M. Odegard;
-
"Polymer-Derived Silicon Carbide and Boron Nitride Nanotube Composites with High Thermal Shock Resistance"
2023 ▪
ACS Applied Engineering Materials
-
"Gamma-ray irradiation to achieve high tensile performance of unidirectional CNT yarn laminates"
2023 ▪
Carbon
Zhiyong Liang;
Jin Gyu Park;
Claire Jolowsky;
Cecil E. Evers;
Britannia Vondrasek;
Michael W. Czabaj;
Bailee E. Ku;
Kaylee R. Thagard;
Gregory M. Odegard;
Yuezhou Wang;
Traian Dumitric?;
-
"Scalable High Tensile Modulus Composite Laminates Using Continuous Carbon Nanotube Yarns for Aerospace Applications"
2023 ▪
ACS Applied Nano Materials
Zhiyong Liang;
Jin Gyu Park;
Claire Jolowsky;
Cecil E. Evers;
Britannia Vondrasek;
Michael W. Czabaj;
Bailee E. Ku;
Kaylee R. Thagard;
Gregory M. Odegard;
-
"A successful strategy for MGI-inspired research"
2023 ▪
MRS Bulletin
-
"Computational Investigation of Interacting Nanohole Defects for Carbon Nanotube Cross-Linking and Functionalization with Bismaleimide: Implications for Ultrastrong, Lightweight Nanocomposites"
2023 ▪
ACS Applied Nano Materials
-
"Computationally Guided Design of Large-Diameter Carbon Nanotube Bundles for High-Strength Materials"
2021 ▪
ACS Applied Nano Materials
Zhiyong Liang;
Jin Gyu Park;
Gregory M. Odegard;
Traian Dumitric?;
Emilie J. Siochi;
Hao Xu;
Grigorii Drozdov;
Benjamin D. Jensen;
Kristopher E. Wise;
-
"Tensile performance and failure modes of continuous carbon nanotube yarns for composite applications"
2020 ▪
Materials Science and Engineering A
-
"Computational Investigation of Large-Diameter Carbon Nanotubes in Bundles for High-Strength Materials"
2020 ▪
ACS Applied Nano Materials
Zhiyong Liang;
Gregory M. Odegard;
Traian Dumitric?;
Emilie J. Siochi;
Grigorii Drozdov;
Chinomso Onuoha;
-
"Real-time Data-driven Quality Assessment for Continuous Manufacturing of Carbon Nanotube Buckypaper"
2020 ▪
IEEE Transactions on Nanotechnology
-
"Investigation of molecular and supramolecular assemblies of cellulose and lignin of lignocellulosic materials by spectroscopy and thermal analysis"
2019 ▪
International Journal of Biological Macromolecules
-
"Tensor Mixed Effects Model With Application to Nanomanufacturing Inspection"
2019 ▪
Technometrics
-
"Tensor Mixed Effects Model With Application to Nanomanufacturing Inspection"
2019 ▪
Figshare
-
"Tensor Mixed Effects Model with Application to Nanomanufacturing Inspection"
2019 ▪
Figshare
-
"Self-Healing Phenomenon Observed During Capacity-Control Cycling of Freestanding Si-Based Composite Paper Anodes for Li-Ion Batteries"
2018 ▪
ACS Applied Materials & Interfaces
-
"A Wavelet-Based Penalized Mixed-Effects Decomposition for Multichannel Profile Detection of In-Line Raman Spectroscopy"
2017 ▪
IEEE Transactions on Automation Science and Engineering
-
"Highly Conductive and Strong Graphite-Phenolic Resin Composite for Bipolar Plate Applications"
2017 ▪
Energy & Fuels
Zhiyong Liang;
J. P. Zheng;
Kang Yao;
Daniel Adams;
Ayou Hao;
Nam Nguyen;
-
"Atomic Resolution Imaging and Analysis of Microstructures and Interface of Aligned Carbon Nanotube Composites"
2017 ▪
-
"Optimization of Buckypaper-enhanced Multifunctional Thermoplastic Composites"
2017 ▪
Scientific Reports
-
"Microfabrication with smooth thin carbon nanotube composite sheets"
2016 ▪
Materials Research Express
Zhiyong Liang;
J. Rowley;
Nathan Boyer;
Lei Pei;
Derric Syme;
Steven Liddiard;
Jonathan Abbott;
Kyle Larson;
Brian Iverson;
Richard Vanfleet;
Robert Davis;
-
"Generalized Wavelet Shrinkage of Inline Raman Spectroscopy for Quality Monitoring of Continuous Manufacturing of Carbon Nanotube Buckypaper"
2016 ▪
IEEE Transactions on Automation Science and Engineering
-
"Macroscopic Crosslinked Neat Carbon Nanotube Materials and CNT/Carbon Fiber Hybrid Composites: Supermolecular Structure and New Failure Mode Study"
2015 ▪
-
"Predicting mechanical properties of multiscale composites"
2013 ▪
Plastics Rubber and Composites Macromolecular Engineering
-
"Strain phenomenon in carbon nanotube buckpaper actuator: Experiments and modeling"
2013 ▪
Sensors and Actuators A Physical
-
"In situ characterization of structural changes and the fraction of aligned carbon nanotube networks produced by stretching"
2012 ▪
Carbon
-
"Thermal conductivity of MWCNT/epoxy composites: The effects of length, alignment and functionalization"
2012 ▪
Carbon
-
"Characterisation and modelling of CNT–epoxy and CNT–fibre–epoxy composites"
2011 ▪
Plastics Rubber and Composites Macromolecular Engineering
-
"Nonlinear strain–electric field relationship of carbon nanotube buckypaper/Nafion actuators"
2011 ▪
Sensors and Actuators A Physical
Zhiyong Liang;
P.-J. Cottinet;
C. Souders;
D. Labrador;
S. Porter;
B. Wang;
C. Zhang;
-
"Electrical conductivity modeling and experimental study of densely packed SWCNT networks"
2010 ▪
Nanotechnology
-
"Functionalized Carbon?Nanotube Sheet/Bismaleimide Nanocomposites: Mechanical and Electrical Performance Beyond Carbon?Fiber Composites"
2010 ▪
Small
-
"Study of fire retardant behavior of carbon nanotube membranes and carbon nanofiber paper in carbon fiber reinforced epoxy composites"
2010 ▪
Carbon
-
"Buckypaper-based catalytic electrodes for improving platinum utilization and PEMFC's performance"
2009 ▪
Electrochimica Acta
-
"Charge-induced asymmetrical displacement of an aligned carbon nanotube buckypaper actuator"
2009 ▪
Carbon
-
"High Mechanical Performance Composite Conductor: Multi?Walled Carbon Nanotube Sheet/Bismaleimide Nanocomposites"
2009 ▪
Advanced Functional Materials
-
"The fabrication of single-walled carbon nanotube/polyelectrolyte multilayer composites by layer-by-layer assembly and magnetic field assisted alignment"
2009 ▪
Nanotechnology
-
"Development of Carbon/Carbon Composites with Through-Thickness Carbon Nanotubes for Thermal and Structural Applications"
2008 ▪
-
"Highly-Efficient Buckypaper-Based Electrodes for PEMFC"
2008 ▪
Meeting abstracts/Meeting abstracts (Electrochemical Society. CD-ROM)
-
"Mechanical and electrical properties of polycarbonate nanotube buckypaper composite sheets"
2008 ▪
Nanotechnology
-
"Processing and modeling of conductive thermoplastic/carbon nanotube films for strain sensing"
2007 ▪
Composites Part B Engineering
-
"Controlled nanostructure and high loading of single-walled carbon nanotubes reinforced polycarbonate composite"
2007 ▪
Nanotechnology
-
"Precise cutting of single-walled carbon nanotubes"
2007 ▪
Nanotechnology
-
"Effect of Nanotube Functionalization on the Coefficient of Thermal Expansion of Nanocomposites"
2006 ▪
Advanced Functional Materials
-
"SWNT Buckypaper Nanocomposites: High Nanotube Loading and Tailoring Nanostructures"
2006 ▪
WORLD SCIENTIFIC eBooks
-
"Fabrication and Characterization of Carbon Nanotube/Glass Fiber-Reinforced Multiscale Composites"
2006 ▪
-
"Effective amino-functionalization of carbon nanotubes for reinforcing epoxy polymer composites"
2006 ▪
Nanotechnology
-
"Statistical characterization of single-wall carbon nanotube length distribution"
2006 ▪
Nanotechnology
-
"Stochastic simulation based approach for statistical analysis and characterization of composites manufacturing processes"
2006 ▪
Journal of Manufacturing Systems
-
"Thermal conductivity of magnetically aligned carbon nanotube buckypapers and nanocomposites"
2005 ▪
Current Applied Physics
-
"A process performance index based on gate-distance and incubation time for the optimization of gate locations in liquid composite molding processes"
2005 ▪
Composites Part A Applied Science and Manufacturing
Zhiyong Liang;
F. Sánchez;
J.A. García;
F. Chinesta;
Ll. Gascón;
C. Zhang;
B. Wang;
-
"Computational analysis of effect of single-walled carbon nanotube rope on molecular interaction and load transfer of nanocomposites"
2005 ▪
Composites Part B Engineering
-
"Resin Infusion Between Double Flexible Tooling: Evaluation of Process Parameters"
2004 ▪
Journal of Reinforced Plastics and Composites
-
"Dimensional Variation Analysis and Synthesis for Composite Components and Assemblies"
2004 ▪
Journal of Manufacturing Science and Engineering
-
"Investigation of the dispersion process of SWNTs/SC-15 epoxy resin nanocomposites"
2004 ▪
Materials Science and Engineering A
-
"Computational and experimental study of interfacial bonding of single-walled nanotube reinforced composites"
2004 ▪
Computational Materials Science
-
"Processing and property investigation of single-walled carbon nanotube (SWNT) buckypaper/epoxy resin matrix nanocomposites"
2004 ▪
Composites Part A Applied Science and Manufacturing
-
"EXPERIMENTAL DESIGN AND OPTIMIZATION OF DISPERSION PROCESS FOR SINGLE-WALLED CARBON NANOTUBE BUCKY PAPER"
2004 ▪
International Journal of Nanoscience
-
"Assembly dimensional variation modelling and optimization for the resin transfer moulding process"
2004 ▪
Modelling and Simulation in Materials Science and Engineering
-
"Dimension variation prediction for composites with finite element analysis and regression modeling"
2004 ▪
Composites Part A Applied Science and Manufacturing
-
"Flow modeling and simulation for vacuum assisted resin transfer molding process with the equivalent permeability method"
2004 ▪
Polymer Composites
-
"Heuristic algorithm for determining optimal gate and vent locations for RTM process design"
2004 ▪
Journal of Manufacturing Systems
-
"Investigation of molecular interactions between (10, 10) single-walled nanotube and Epon 862 resin/DETDA curing agent molecules"
2003 ▪
Materials Science and Engineering A
-
"Non-isothermal Mold Filling and Curing Simulation for Resin Transfer Molding"
2003 ▪
Chinese Journal of Aeronautics
-
"In situ measurement and monitoring of whole-field permeability profile of fiber preform for liquid composite molding processes"
2003 ▪
Composites Part A Applied Science and Manufacturing
-
"Resin infusion between double flexible tooling: prototype development"
2003 ▪
Composites Part A Applied Science and Manufacturing
-
"Process Investigation of Carbon Nanotube Bucky Paper/Epoxy Nanocomposites"
2003 ▪
44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
-
"Resin transfer molding process optimization using numerical simulation and design of experiments approach"
2003 ▪
Polymer Composites
-
"Nanoscale Modeling and Simulation of Interfacial Bonding of Single-Walled Nanotube Reinforced Composites"
2003 ▪
Electronic and Photonic Packaging, Electrical Systems and Photonic Design, and Nanotechnology
-
"Theoretical Prediction and Experimental Study of Mechanical Properties for Random and Magnetically Aligned Single-Walled Carbon Nanotube/Epoxy Composites"
2003 ▪
MRS Proceedings
-
"Application of Molecular Dynamic Simulation to Nanocomposite Processing: Investigation of Interactions Between Nanotube and Polymer Molecules"
2002 ▪
-
"Optimum tooling design for resin transfer molding with virtual manufacturing and artificial intelligence"
2001 ▪
Composites Part A Applied Science and Manufacturing
-
"Statistical characterization of fiber permeability for composite manufacturing"
2000 ▪
Polymer Composites
-
"Optimum tooling design for resin transfer molding with virtual manufacturing"
2000 ▪
Chinese Journal of Mechanical Engineering